Power Amplifier
High Intensity Radiation Field (HIRF) system
Electronic warfare simulation system
Intermodulation test system
Rf matrix system
Microwave active module
Passive device
Product Center
Electrostatic discharge test
Electrostatic discharge test
Summarize
ESD stands for electrostatic discharge. Many materials can conduct electricity and accumulate charge. ESD occurs due to triboelectrification (friction between materials) or electrostatic induction. Whenever this happens, the object forms a fixed charge (static electricity) on its surface. When this object is placed too close to another charged object or material, the voltage difference causes current to flow between them until the charge balance is restored. Electrostatic discharge can therefore be defined as an instantaneous current flow between two charged materials or objects caused by contact, short circuit, or dielectric breakdown.
Product Advantages
The static electricity between the human body and the object or between two objects sometimes generates a voltage of up to thousands of volts, which may cause the circuit of electrical and electronic equipment to fail or even damage. NT-ESD is a more advanced intelligent electrostatic discharge generator, output voltage 30 kV, set discharge gun head and touch screen control in one electrostatic discharge simulator, according to the requirements of EN/IEC 61000-4-2 accurate simulation of electrostatic discharge pulse interference, according to ergonomic design. The LCD touch screen is simple and easy to operate, the power supply can be selected AC and battery box, the RC module can be replaced, and the built-in temperature and humidity meter ensures the reliability of use in various test occasions.
Application Scenario
Ergonomic design;
LCD touch screen control;
Temperature and humidity recording and protection;
Automatic polarity conversion;
The discharge module is interchangeable, automatic identification;
Built-in standard test library;
Intelligent detection of air discharge failure.
ESD test typical test layout, see figure
Main technical parameters
System configuration：
|
order number |
name |
model |
Specification description |
vender |
quantity |
|
1 |
Electrostatic discharge simulator |
NT-EDS 30V |
Contact Discharge 200V-30,000V (± 5%) Air Discharge 200V-30,000V (± 5%) |
RFLIGHT |
1 |
|
Pulse repetition rate single time / 0.1/0.2/0.5/1/2/5/10/20Hz |
|||||
|
Hold time is greater than the positive and negative 5S polarity |
|||||
|
Contact discharge module 150 pF / 330 ohm rise time 0.7-1ns ± 25% |
|||||
|
Implementation standard: IEC61000-4-2, ISO10605 |
|||||
|
2 |
Electrostatic discharge table and supporting facilities |
NT-ESDTable |
Contains electrostatic discharge table, vertical coupling board, horizontal coupling board, etc. |
RFLIGHT |
1 |
Friendly Link
025-84471796
sales@rflight.cn
WeChat Public:
Record number: Su Gongwang Security 32011502021381