Power Amplifier
High Intensity Radiation Field (HIRF) system
Electronic warfare simulation system
Intermodulation test system
Rf matrix system
Microwave active module
Passive device
Product Center
Bench isolator intermodulation instrument
Bench isolator intermodulation instrument
Product Description
Benchtop intermodulator specifications (transmission mode)Operating Mode:
Transfer Mode
Operating Frequency:
See technical specifications (attached)
Test Port Output Power:
33dBm ≤ 47dBm, output connector is NF type
Power Accuracy:
±0.35dB
The System Itself Intermodulates:
≤-85dBc typical (1, 2, 3, 4, 5MHz per port transmission mode spacing, 90% of band) / (2x 43dBm)
System Software:
a) The software supports 3rd order transmission intermodulation product testing.
b) Selectable measurement modes: spot frequency test, sweep frequency test
c) Remote control: LAN port;
d) Automatic creation of test data export
e) Software adjustable parameters:
-Test frequency
-Intermodulation test step
-Carrier power
-Single/repeat test
-dBc unit display
-High and low end third order intermodulation display
Signal Source:
a) Frequency accuracy: ±2ppm,typical ±5ppm,maximum;
TV or radio receiver:
a) Average low noise: -130dBm,typical (-135dBm maximum)
b) Dynamic range: 100dB, typical
c) Receiver test range: -40 to -130dBm
Equipment Protection And Detection Functions:
Overcurrent protection;
Over-voltage protection;
Over-temperature protection; (≥+60°C)
Operating Temperature:
Upper working temperature: +0...+45°C
Recommended operating temperature: +10...+25°C
Power Supply Specifications:
220V±10% 50/60Hz
Chassis Size:
Width: 19 inches, height: ≤6U, depth: 600mm
Configuration: industrial computer, built-in monitor
New Type
Isolator Test Combined Intermodulator (Test Range: 728MHz-960MHz) | ||||||
Serial No. | Title | Model | Test bands | Test Power (device test port) | Test Power (device test port) | Test Power (device test port) |
1 | Broadband active segment equipment | NTPIM-0710*** | 728MHz–960MHz | 2×44dBm NTPIM-0710100 | 2×47dBm NTPIM-0710200 | 2×49dBm NTPIM-0710300 |
2 | Broadband active control section equipment | NTPIM-0710RF | 728MHz–960MHz | 2×44dBm | 2×47dBm | 2×47dBm |
3 | Passive component equipment | NTPIM-0710C | TX band: 728MHz-960MHz RX band: 728MHz-960MHz | 2×44dBm | 2×47dBm | 2×47dBm |
4 | Cabinet | Standard 1.6 meter cabinet | ||||
5 | Systems Integration and Services | / | ||||
Isolator Test Combined Intermodulator (Test Range: 1805MHz-2170MHz) | ||||||
Serial No. | Title | Model | Test bands | Test Power (device test port) | Test Power (device test port) | Test Power (device test port) |
1 | Broadband active segment equipment | NTPIM-1822*** | 1805MHz–2170MHz | 2×44dBm NTPIM-1822100 | 2×47dBm NTPIM-1822200 | 2×49dBm NTPIM-1822300 |
2 | Broadband active control section equipment | NTPIM-1822RF | 1805MHz–2170MHz | 2×44dBm | 2×47dBm | 2×47dBm |
3 | Passive component equipment | NTPIM-1822C | TX band: 1805MHz-2170MHz RX band: 1805MHz-2170MHz | 2×44dBm | 2×47dBm | 2×47dBm |
4 | Cabinet | Standard 1.6 meter cabinet | ||||
5 | Systems Integration and Services | / | ||||
Isolator Test Combined Intermodulator (Test Range: 2300MHz-2700MHz) | ||||||
Serial No. | Title | Model | Test bands | Test Power (device test port) | Test Power (device test port) | Test Power (device test port) |
1 | Broadband active segment equipment | NTPIM-2327*** | 2300MHz–2700MHz | 2×44dBm NTPIM-2327100 | 2×47dBm NTPIM-2327200 | 2×49dBm NTPIM-2327300 |
2 | Broadband active control section equipment | NTPIM-2327RF | 2300MHz–2700MHz | 2×44dBm | 2×47dBm | 2×47dBm |
3 | Passive component equipment | NTPIM-2327C | TX band: 2300MHz-2700MHz RX band: 2300MHz-2700MHz | 2×44dBm | 2×47dBm | 2×47dBm |
4 | Cabinet | Standard 1.6 meter cabinet | ||||
5 | Systems Integration and Services | / | ||||
Isolator Test Combined Intermodulator (Test Range: 3400MHz-3800MHz) | ||||||
Serial No. | Title | Model | Test bands | Test Power (device test port) | Test Power (device test port) | Test Power (device test port) |
1 | Broadband active segment equipment | NTPIM-3438*** | 3400MHz–3800MHz | 2×44dBm NTPIM-3438100 | 2×47dBm NTPIM-3438200 | 2×49dBm NTPIM-3438300 |
2 | Broadband active control section equipment | NTPIM-3438RF | 3400MHz–3800MHz | 2×44dBm | 2×47dBm | 2×47dBm |
3 | Passive component equipment | NTPIM-3438C | TX band: 3400MHz-3800MHz RX band: 3400MHz-3800MHz | 2×44dBm | 2×47dBm | 2×47dBm |
4 | Cabinet | Standard 1.6 meter cabinet | ||||
5 | Systems Integration and Services | / | ||||
Isolator Test Combined Intermodulator (Test Range: 4400MHz-5000MHz) | ||||||
Serial No. | Title | Model | Test bands | Test Power (device test port) | Test Power (device test port) | Test Power (device test port) |
1 | Broadband active segment equipment | NTPIM-4450*** | 4400MHz–5000MHz | 2×44dBm NTPIM-4450100 | 2×47dBm NTPIM-4450200 | 2×49dBm NTPIM-4450300 |
2 | Broadband active control section equipment | NTPIM-4450RF | 4400MHz–5000MHz | 2×44dBm | 2×47dBm | 2×47dBm |
3 | Passive component equipment | NTPIM-4450C | TX band: 4400MHz-5000MHz RX band: 4400MHz-5000MHz | 2×44dBm | 2×47dBm | 2×47dBm |
4 | Cabinet | Standard 1.6 meter cabinet | ||||
5 | Systems Integration and Services | / |