Dual Reflection Mode

Test port output power.

±0.35dB

≤-168dBc typical (per port reflection mode, 90% of the band) / (2x 43dBm)

a) Software supports 3rd, 5th, 7th, 9th, and 11th order reflection intermodulation product testing.

b) Selectable measurement modes: spot frequency test/time domain test/sweep frequency test

c) Remote control: LAN port;

d) Automatic creation of test reports, which can be exported in the form of documents and screenshots.

e) Software adjustable parameters:

-Test frequency and sweep range

-Intermodulation test step

-Carrier power

-Number of test steps

-Single/repeat test

-dBm/dBc unit conversion

a) Frequency accuracy: ±2ppm,typical ±5ppm,maximum;

a) Average low noise: -130dBm,typical (-135dBm maximum)

b) Dynamic range: 75dB, typical

c) Receiver test range: -55 to -130dBm

d) Accuracy: ±1.5dB@ -110dBm (typical)

Overcurrent protection;

Over-voltage protection;

Over-temperature protection; (≥ +60 ℃)

When the device is open or short-circuit standing wave alarm, immediately stop working, the output open or short-circuit should not burn the amplifier

Upper working temperature: +0...+45°C

Recommended operating temperature: +10...+25°C

220V±10%   50/60Hz

Width: 19 inches, height: ≥6U, depth: 600mm

Special frequency bands need to adopt combined structure due to the size of passive components.

Built-in industrial controller, touch screen

Frequency: AMPS800, EGSM900, GSM900, DCS1800, PCS1900, TD-SCDMA A/B, UMTS2100 compatible can be realized.

Frequency accuracy: ±2ppm typical ±5ppm, maximum.

Test Port Power: 2 carrier signals with power 20dBm ≤ +46dBm.

Output power accuracy: ±0.25dB typical ±0.3dB maximum.

Display: Display on computer.

Storage: Store the test results on the computer and take them out through the special interface, create the test report automatically, export it in Word form, and all the test data can be exported in the form of screenshots.

Average noise floor: -138dBm, maximum

Dynamic Range: 80dB, TYPICAL.

Upper operating input power: -63dBm RMS (mixed at transmit and receive frequencies).

Required Safe Input Power: 20dBm (mixed power at any frequency).

Reflected Power Protection: 50dBm (100Watt)

Over standing wave protection: VSWR ≥ 3.

Over-temperature protection: ≥60°C

Self-intermodulation (2×43dBm): < -168dBc (standard product reflection mode) < -172dBc maximum
(2×43dBm): < -160dBc typical (transmission mode) < -163dBc maximum

Dimensions: 480mm (W) x 600mm (D) x 225mm (H) (single layer)

Warm-up time: 3 minutes.

Power supply specifications: 100~240V AC, 50/60Hz.

Operating temperature: Upper operating temperature range -10~+45℃; Recommended operating temperature range +15~+25℃.

Measurement modes: spot frequency test, time domain test, frequency sweep test

Remote control (optional): RS232, USB, LAN (TCP/IP)